 |
|
| |
|
|
|
|
Lessons use animation,
graphics, audio and interactive exercises to augment and
intensify the entire learning experience. Each lesson is
Menu-driven, allowing participants to take easy control
of, and manage, their individual learning path.
Industrial
Hydraulic Power
Thirteen individual lessons make up the ITC On-Line Hydraulics
Library. ITC’s Hydraulics library was specifically
developed for beginning hydraulics technicians, mechanics,
electricians, and operators who need to know about industrial
hydraulic power.
1. Introduction to Hydraulic
Systems
2. Hydraulic Schematics
3. Hydraulic Fluid
4. Hydraulic Pump Applications
5. Positive Displacement Pumps
6. Hydraulic Accumulators
7. Pressure Control Principles
8. Pressure Control Operation
9. Pressure Control Valve Application
10. Directional Control Principles
11. Flow Control Valves
12. Actuator Cylinders
13. Hydraulic Motors |
|
| |
|
|
|
Electrical
Safety
Eight individual lessons make up the ITC On-Line Electrical
Safety Library. ITC’s Electrical Safety library was
specifically developed for employees in all disciplines that
require knowledge in basic electrical safety awareness. Each
lesson is a self-paced comprehensive training program, and
is divided into individual topic areas.
1. Working Safely with Electricity
2. Electrical Circuits and Supplies
3. Electrical Shock
4. Electrical Person Protective Equipment
5. Protective Gloves and Sleeves
6. Eye and Face Protection
7. Protective Helmets
8. General Protective Equipment
|
|
| |
|
AC/DC
Motor Theory
ITC’s AC/DC Motor
Theory library was specifically developed for electricians
and electronic technicians as well as for the multi-craft
training needs of process and manufacturing facilities. This
library consists of 11 interactive, on-line lessons that address
AC and DC motor theory. These lessons take approximately 30
to 45 minutes to complete.
AC/DC
Motor Maintenance
This lesson was designed to provide training for electricians,
mechanics, and others, wanting to know more about AC and DC
motor maintenance. This library consists of 12 interactive,
on-line lessons that address AC and DC motor maintenance.
These lessons take approximately 30 to 45 minutes to complete.
1. Introduction to AC Motor
Maintenance
2. Records, Tools, and Instruments
3. Preventive AC Motor Maintenance
4. Measurement in Preventive AC Motor Maintenance
5. Preparing for Periodic AC Motor Maintenance
6. Motor Disassembly and Reassembly in Periodic
AC Motor Maintenance
7. Corrective Maintenance for AC Motors
8. Introduction to DC Motor Maintenance
9. Commutator Inspection
10. Commutator Wear
11. Commutator Maintenance
12. Brush Maintenance |
|
| |
|
Electrical
Print Reading
This lesson was designed to provide training for electricians,
mechanics, and others, wanting to know more about electrical
print reading. This library consists of eight interactive,
on-line. These lessons take approximately 30 to 45 minutes
to complete.
1. Introduction to Electrical
Schematics
2. Electrical Schematic Symbols - Input Devices
3. Electrical Schematic Symbols - Logic and Output Devices
4. Interpreting Electrical Schematics
5. Introduction to Electrical Diagrams
6. Building Electrical Diagrams
7. Single-Line Electrical Diagrams
8. Wiring Diarams
|
|
| |
|
Mechanical
Print Reading
This library consists of
4 interactive, on-line lessons. These lessons take approximately
30 to 45 minutes to complete.
1. Introduction to Mechanical
Print Reading
2. Lines Used in Mechanical Print Reading
3. Dimensions in Mechanical Print Reading
4. Orthographic Projection |
|
| |
|
Logical
Thinking (Troubleshooting) Skills
These lessons teach strategic
troubleshooting skills that can be applied to the analysis
of problems in any type of industrial system. The lessons
teach participants how to develop logical thinking and create
a personal troubleshooting outlook that will prove valuable
under any troubleshooting situation.
1. Introduction to Troubleshooting
2. Information Gathering
3. Troubleshooting
4. Improving Troubleshooting Skills
|
|
| |
|
Conduit
Installation
This library consists of
3 interactive, on-line lessons. These lessons were designed
for the training of electricians as well as for the multi-craft
training needs of process and manufacturing facilities. It
trains participants on identifying and applying the basic
materials of a conduit system.
1. Conduit System Materials
2. Conduit Bending
3. Conduit Layout and Installation |
|
| |
|
Multimeters
This library consists of 5 interactive, on-line lessons. These
lessons take approximately 30 to 45 minutes to complete. These
lessons were designed to provide training for persons working
with electrical or electronic test equipment. These lessons
present general information about multimeters.
1. Digital Multimeters
2. Analog Multimeters
3. Multimeter Selection and Inspection
4. Using Multimeters
5. Advanced Features of Digital Multimeters |
|
| |
|
Mechanical
Seals
This library consists of 4 interactive, on-line lessons. These
lessons were designed for persons with a basic understanding
of the operation and maintenance of pumps, agitators, and
rotating equipment.
1. Introduction to
Mechanical Seals
2. Mechanical Seal Designs
3. Failure Analysis
4. Mechanical Seal Maintenance
|
|
| |
|
Office
Security
This library consists of 1 interactive, on-line lesson. This
lesson was designed to provide training for anyone using computers
in the workplace. This lesson will provide some practical
measures to help protect your computer system from threats
that may harm it.
| 1. Office Computer
Data Security |
|
| |
|
Oscilliscopes
Nine individual lessons make up the ITC On-Line Oscilloscopes
Library. These lessons were designed for the training of electricians
and electronic technicians as well as for the multi-craft
training needs of process and manufacturing facilities.
1. Introduction to
Oscilloscopes
2. The Display
3. Vertical System Controls
4. Horizontal System Controls
5. The Trigger System
6. Probes
7. Setup
8. Waveforms
9. Measurement
|
|
| |
|
Electrical
Theory for Troubleshooters
This library consists of 12 interactive, on-line lessons.
These lessons are excellent for the training of electricians
and electronic technicians as well as for the multi-craft
training needs of process and manufacturing facilities. The
first four lessons in this library cover basic electrical
concepts including Ohm’s Law and Kirchhoff’s Law,
as well as the use of these laws to determine voltage, current,
and resistance in series and parallel circuits.
1. Introduction to Electricity
2. Basic Electrical Properties
3. Series Circuits
4. Parallel Circuits
5. Alternating Current
6. Electromagnetism
7. Inductance
8. Capacitance
9. Three-Phase Circuits
10. Wye and Delta Connections
11. Introduction to Transformers
12. Transformers |
|
| |
|
Precision
Measuring Instruments
This library consists of four lessons. The lessons in this
library were designed for employees in all disciplines as
well as for the multi-craft training needs of process and
manufacturing facilities. This library describes the purpose
and the basic components of some common precision measuring
instruments.
1. Dial Calipers
2. Micrometers
3. Telescoping and Thickness Gauges
4. Dial Indicators
|
|
| |
|
Ammeters,
Meggers, and Wheatstone Bridge
This library consists of five lessons. This library is designed
for participants familiar with AC/DC theory, electrical safety,
and electrical print reading. A basic understanding of electronic
devices and circuits is recommended. The library describes
megohmmeters, Wheatstone bridges, and clamp-on ammeters. It
gives examples of the use of these instruments, identifies
their components, and defines their functions. The lessons
also describe safety and selection considerations for their
use, how to set up the instruments, how to connect them to
the systems under test, and how to take and read measurements.
1. Introduction to
Megohmmeters
2. Using the Megohmmeter
3. Wheatstone Bridge
4. Using a Wheatstone Bridge
5. Clamp-on Ammeters
|
|
| |
|
Hand
Tools
This library consists of four lessons. This library is designed
for employees in all disciplines as well as for the multi-craft
training needs of process and manufacturing facilities. Upon
completion of this lesson, participants will be able to improve
their on-the-job performance through the proper use hand tools.
1. Clamps, Vises, and Pliers
2. Screwdrivers
3. Wrenches
4. Hammers, Mallets, and Sledges |
|
| |
|
Industrial
Lubrication
This library consists of four lessons. This library is designed
for training oilers, mechanics, and millwrights as well as
for the multi-craft needs of process and manufacturing facilities.
Participants are trained to recognize various types of lubrication
systems and their maintenance requirements, including ring,
bath, splash, constant level, and forced feed lubrication
systems, as well as understand how they operate. Participants
also learn the importance of following lubrication schedules,
how to change common types of oil filters, and how to properly
handle and store lubricants to prevent lubricant contamination.
1. Introduction to Industrial Lubrication
2. Lubricants
3. Lubrication Systems
4. Filters and Lubrication Maintenance
|
|
|
|